|
| PRE MCRO button | ||||
|
|
|
|
| POST MCRO button | |
SHIFT | M/E | M/E | M/E | XPT | KEY3 | |
1 | 2 | 3 | HOLD | |||
SHIFT | M/E | M/E | M/E | XPT | KEY4 | |
1 | 2 | 3 | HOLD | |||
|
| |||||
| SHIFT |
|
| PRE | POST | |
|
|
| MCRO | MCRO | ||
|
|
|
| |||
SHIFT | M/E | M/E | M/E | XPT | MCRO | |
ATTCH | ||||||
1 | 2 | 3 | HOLD | |||
| ENBL | |||||
|
|
|
|
| ||
SHIFT | M/E | M/E | M/E | XPT | UTIL | |
1 | 2 | 3 | HOLD | |||
|
| |||||
Background B row |
|
| MCRO ATTCH ENBL button |
Background A row
The
If you make both pre macro and post macro settings for the same button
The later setting is valid.
To make a macro attachment setting in macro only mode
Note
To carry out this operation, it is first necessary to assign the “Macro Only Set” function to one of the user preference buttons in the menu control block. Carry out this assignment in the Eng Setup>Panel>Prefs/Utility menu. (For details, see “Setting Button Assignments (Prefs/Utility Menu)” (page 218).)
To make a macro attachment in Macro Only mode, use the following procedure.
1 Recall the macro register you want to assign to the button.
For details of recall from the numeric keypad control block, see page 311. For details of recall from the Flexi Pad control block, see page 317.
Macros 18 Chapter
Macro Attachment Assigning 323