6
7
8
The Link Bus Select menu appears.
The status area lists the current setting status of the selected link and the buses that can be selected.
4 In the <Bus Select> group, select [Master Bus] (link source bus).
5 Using any of the following methods, select the bus to be the link source, and press [Bus Set].
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.
Press [Link Bus Select].
3

Setup Engineering 16 Chapter

Knob

Parameter

Adjustment

Setting values

 

 

 

 

2

No

Bus selection

1 to 118 a)

a)Only when [Master Bus] is selected, 115 (M/E-1 Trans PGM), 116 (M/ E-2 Trans PGM), 117 (M/E-3 Trans PGM), and 118 (P/P Trans PGM) are available. When [Linked Bus] is selected, 115 to 118 are not available.

Note

With one of 113 to 116 selected for [Master Bus], linking is carried out as soon as you start moving the fader lever.

In the <Bus Select> group, select [Linked Bus] (link destination bus).

Referring to step 5, select the bus to be the link destination, and press [Bus Set].

Turn the knob to select the link table, and press [Link Table Set].

Knob

Parameter

Adjustment

Setting values

 

 

 

 

3

Link Table No

Link table selection

1 to 8

 

 

 

 

For more information about link tables, see the following item. The status area reflects the current setting status.

To delete a link

Select the link you want to delete, then press [Clear] in the Internal Bus Link menu.

Making link table settings

Use the following procedure.

250 Setup Relating to Switcher Processor