Setup Engineering 16 Chapter

4 When you selected Tally Input as the tally generation mode in step 3, select any of the following in the <Tally Input> group.

DCU1: Generate tally with reference to signal input to DCU1 port. Set the port number with the knob.

DCU2: Generate tally with reference to signal input to DCU2 port. Set the port number with the knob.

5 Turn the knob to select the tally input port number.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

5

Input No

Tally input port number

1 to 102

 

 

 

 

6 Press [Execute].

This sets the settings made in steps 2 to 5 as the settings for tally generation.

Modifying tally generation

Use the following procedure.

1 In the Router/Tally>Tally Enable menu, press [Modify].

The Modify menu appears.

2 With reference to steps 2 to 5 in the preceding section “Making new tally generation settings,” change the parameters as required.

3 Press [Execute].

This modifies the tally generation settings.

Deleting tally generation settings

Use the following procedure.

1 Using either of the following methods in the Router/Tally Enable menu, select the tally generation entry you want to delete.

•Press directly on the list appearing in the status area.

•Press the arrow keys to scroll the reverse video cursor.

2 Press [Delete].

This deletes the selected tally generation entry.

284 Setup Relating to Router Interface and Tally