2 Turn the knob to set the port number.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

2

GPI Out

GPI output port number

1 to 8

 

Port

 

 

 

 

 

 

For details of attributes and available attributes, see “Snapshots” in Chapter 1 (Volume 1).

Snapshot Status Display

Snapshots 14 Chapter

The Snapshot>Attribute menu displays the following information.

For details of how to access the Snapshot>Attribute menu, see page 170.

Region name: The selected region name appears in the upper part of the list.

Register number

Register name

Write-protected status: When the register is write-protected, an “L” (for “lock”) appears.

Empty status: When the register is empty, an “E” (for “empty”) appears.

Attribute settings: The attributes set for a register are shown by the following character codes.

When the cross-point hold is set:

Displayed

Attributes set

character codes

 

 

 

A, B

Cross-point hold is set for the A or B background bus.

 

 

1, 2, 3, 4

Cross-point hold is set for key bus 1, 2, 3, or 4. a)

U1, U2

Cross-point hold is set for the utility 1 or utility 2 bus.

 

 

Fv

Cross-point hold is set for the DME front video bus.

 

 

Fk

Cross-point hold is set for the DME front key bus.

 

 

Bv

Cross-point hold is set for the DME back video bus.

 

 

Bk

Cross-point hold is set for the DME back key bus.

 

 

Aux

Cross-point hold is set for one of the AUX buses.

 

 

Mon

Cross-point hold is set for one of the monitor buses.

 

 

Fm1, Fm2

Cross-point hold is set for one of the frame memory 1 and 2

 

buses.

 

 

RTR

Cross-point hold is set for the Router region.

 

 

a) When [Key Disable] is selected for [XPT Hold] mode in setup, Key disable is set.

172 Snapshot Operations in the Menus