Devices External 12 Chapter
a)1: Off (no specification)
2:Store
3:Recall
4:Trigger
4 If in step 3 you selected 2 (Store), 3 (Recall), or 4 (Trigger), turn knob 3 to select the register number or trigger number.
The indication for knob 3 changes to reflect the selection of Store, Recall, or Trigger.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
3 | Store No | Register number for Store | 1 to 99 |
|
|
|
|
3 | Recall No | Register number for Recall | 1 to 99 |
|
|
|
|
3 | Trigger No | Trigger number | 0 to 15 |
|
|
|
|
The setting is reflected in the list on the right of the status area.
5 Press [Set].
For the device selected in the list on the left of the status area, this sets the action specified in step 4.
Repeat steps 2 to 5 as required for other devices.
Testing an action command
To produce a test output of the action command, press [Test Fire].
The action command is output from the
Clearing an action setting
To clear the setting for separate devices
Use the following procedure.
1 In the list on the left of the status area, select the device for which you want to clear the action setting.
2 In the list on the right, select “Off.”
3 Press [Set].
To clear the action settings for all devices in a single operation
Press [All Off].
88 Control of