Effects Keyframe 13 Chapter
Setting the keyframe duration
You can set the value of the keyframe duration independently for each keyframe, by the following method.
1 Press the [EDIT ENBL] button, turning it on.
2 Stop the effect on the keyframe for which you want to set the duration.
The time from this keyframe to the following keyframe is what you set.
3 Press the [KF DUR] button, turning it on.
The display in the numeric keypad control block shows “KF DUR” followed by the duration of the current keyframe (seconds:frames).
4 Using the numeric keypad in the numeric keypad control block, enter the timecode value for the keyframe duration, as a maximum of four digits.
For example, to set 9 seconds and 20 frames, enter 920. You can also use the [TRIM] button to enter a difference value. (See “To enter a difference value” (page 119).)
5 Press the [ENTER] button to confirm the entry.
This changes the keyframe duration to the new setting.
Note
In addition to the above operation, the keyframe duration may also be automatically changed as a result of changing the effect duration. (See the next section.)
Setting the Effect Duration
To set the effect duration, use the following procedure.
1 Press the [EDIT ENBL] button, turning it on.
2 Press the [EFF DUR] button, turning it on.
The display in the numeric keypad control block shows “DUR” followed by the effect duration (minutes:seconds:frames).
134 Time Settings