Setup Engineering 16 Chapter

2 Using any of the following methods, select the GPI output port.

•Press directly on the list appearing in the status area.

•Press the arrow keys to scroll the reverse video cursor.

•Turn the knob to make the setting.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

GPI Port

GPI output port selection

1 to 8

 

 

 

 

3 Press [GPI Link Adjust].

The GPI Link Adjust menu appears.

The status area shows the current setting state of the selected link, and a list of the selectable video names or button names, together with the GPI link Enable/Disable setting for each bus.

4 Using any of the following methods, select what the setting applies to. For each GPI port there can be up to eight links.

•Press directly on the list appearing in the status area.

•Press the arrow keys to scroll the reverse video cursor.

•Turn the knobs to make the selection.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

GPI Port

GPI output port selection

1 to 8

 

 

 

 

2

Link No

Link number selection

1 to 8

 

 

 

 

3

Video/Button No

Video or button name

1 to 136 a)

 

 

selection

 

 

 

 

 

a)These include main pair numbers 1 to 128, and “Cut” and “Auto Trans” on each operating bank.

5 In the <Video/Button> group, press [Select].

The selected video or button name is reflected in the status area.

To clear a video/button name link

Make the selection to which the setting applies, then in the <Video/ Button> group press [Clear].

6 To select for each bus whether the GPI link setting is enabled or disabled, use any of the following methods to select the bus to which the setting applies.

•Press directly on the list appearing in the status area.

•Press the arrow keys to scroll the reverse video cursor.

•Turn the knob to make the selection.

252 Setup Relating to Switcher Processor