4 Set the parameters.
• When Video/Key is selected
Operations DME 11 Chapter
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | H | Horizontal defocusing of video | 0.00 to 100.00 |
|
| and key signals |
|
|
|
|
|
2 | V | Vertical defocusing of video and | 0.00 to 100.00 |
|
| key signals |
|
|
|
|
|
3 | All | Horizontal and vertical | H value shown |
|
| defocusing of video and key |
|
|
| signals |
|
|
|
|
|
• When Video is selected |
|
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | H | Horizontal defocusing of video | 0.00 to 100.00 |
|
| signal |
|
|
|
|
|
2 | V | Vertical defocusing of video | 0.00 to 100.00 |
|
| signal |
|
|
|
|
|
3 | All | Horizontal and vertical | H value shown |
|
| defocusing of video signal |
|
|
|
|
|
5 To cancel black level leaking that can occur at the edge of the screen when the Defocus effect is enabled, press [Clean Defocus], turning it on.
Blur Settings
This effect blurs the entire image.
Applying the Blur effect
Use the following procedure.
1 In the DME menu, select VF2 ‘Video Modify’ and HF1 ‘Defocus/Blur.’
The Defocus/Blur menu appears.
2 Press [Blur], turning it on.
The Blur effect is enabled. You can adjust the blurring of video and key signals with the knobs.
30 DME Special Effect Operations