4 To set the color of the sepia image, press [Sepia Color], turning it on, and adjust the parameters.
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Luminance | Luminance | 0.00 to 100.00 |
|
|
|
|
2 | Saturation | Saturation | 0.00 to 100.00 |
|
|
|
|
3 | Hue | Hue | 359.99 to 0.00 |
|
|
|
|
Mono Settings
This effect converts the image into a monochrome image.
Applying the Mono effect
Use the following procedure.
1 In the DME menu, select VF2 ‘Video Modify’ and HF3 ‘Color Modify.’
The Color Modify menu appears.
2 Press [Mono], turning it on.
The Mono effect is enabled. The color image changes to monochrome.
Posterization and Solarization Settings
The Posterization and Solarization effects both give a
Applying the Posterization or Solarization effect
Use the following procedure.
1 In the DME menu, select VF2 ‘Video Modify’ and HF3 ‘Color Modify.’
The Color Modify menu appears.
2 Press [Poster/Solar], turning it on.
The Posterization and Solarization effects are enabled. You can adjust the coarseness of the gradations with the knobs.
Operations DME 11 Chapter
DME Special Effect Operations 33