Macros 18 Chapter
4
5 In the numeric keypad control block, press the [MCRO] button, turning it red.
6 Press the [STORE] button.
This completes macro editing, and the [MCRO] and [STORE] buttons in the numeric keypad control block light amber. The keyframe control block returns to the state before macro editing began.
7 Save the macro in the numeric keypad control block.
For details of the method of operation, see “Saving a Macro” (page 314).
Inserting a pause event
Use the following procedure.
1 In the keyframe control block, press the [PAUSE] button, lighting it green.
The numeric keypad control block display shows “PAUSE.”
2 With the buttons in the numeric keypad control block, enter the length of the pause (1 to 999 frames).
3 Press the [ENTER] button.
This sets the pause length, and inserts the pause event.
Saving a Macro
To save a macro you have created or edited, use the following procedure.
1 In the numeric keypad control block, press the [MCRO] button, turning it on.
This assigns the numeric keypad control block to macro operations.
2 Press the [STORE] button, turning it on.
3 Enter the number of the register in which you want to save the macro with the numeric keypad buttons.
To search for an empty register, instead of entering a number, press the [.] (period) button.
314 Macro Operations in the Numeric Keypad Control Block