To modify all keyframes in the effect
Use the following procedure.
1 Press the [EDIT ENBL] button, turning it on.
2 Carry out the necessary modifications on any keyframe.
3 Press the [ALL] button, turning it on.
4 Press the [MOD] button. Alternatively, hold down the [SHIFT] button and press the [MOD] button.
For the difference in the result, see “Differences in the changes when a number of keyframes are modified” (page 124).
This makes the modification simultaneously to all keyframes in the effect.
To modify the keyframes in a specified range
Use the following procedure.
1 Press the [EDIT ENBL] button, turning it on.
2 Stop the effect at any keyframe within the range to be modified. 3 Carry out the necessary modifications.
4 Press the [FROM TO] button, turning it on.
The display in the numeric keypad control block shows the current keyframe number, followed by “TO.”
5 Using the numeric keypad in the numeric keypad control block, carry out the following operations.
•To set the first keyframe in the range to be modified, press the [CLR] button, then enter the keyframe number, and press the [ENTER] button to confirm.
•To set the last keyframe in the range to be modified, enter the keyframe number from the numeric keypad, and press the [ENTER] button to confirm.
6 Press the [MOD] button. Alternatively, hold down the [SHIFT] button and press the [MOD] button.
For the difference in the result, see “Differences in the changes when a number of keyframes are modified” (page 124).
Effects Keyframe 13 Chapter
Creating and Editing Keyframes 123