Setup Engineering 16 Chapter

4 Enter any name of not more than 16 characters, then press [Enter].

For details of keyboard window operation, see “Menu Operations” in Chapter 2 (Volume 1).

5 To set the source name display color, in the <LCD Color> group select the color (Orange/Green/Yellow).

Using multi cross-point assign tables

In addition to the normal assignment (“main table”), as “cross-point assign tables” you can create up to four “sub” tables (Sub1 to Sub4). However, you can only carry out assignment of the video and key combinations in the Main table.

You can select the table to be used for each of the following banks or buses.

•M/E-1 to M/E-3 banks and PGM/PST bank

•Buses assignable to AUX delegation buttons

Use the following procedure.

1 In the Panel>Xpt Assign menu, press [Multi Xpt Assign].

The Multi Xpt Assign menu appears.

The status area shows the bank and bus names, and the cross-point assign table.

2 Using any of the following methods, select the bank or bus.

•Press directly on the list in the status area.

•Press the arrow keys to scroll the reverse video cursor.

•Turn the knob to make the setting.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Bank/Bus

Bank or bus selection

1 to 108

 

 

 

 

3 In the <Xpt Table Select> group, select the cross-point table you want to assign.

Creating a “sub” table

To set the Sub1 table, use the following procedure.

1 In the Panel>Xpt Assign>Multi Xpt Assign menu, press [Sub Table Assign].

The Sub Table Assign menu appears.

The status area shows a list of the sub table assignments.

214 Setup Relating to Operations From the Control Panel