2 Press [Lighting], turning it on.
The Lighting effect is enabled.
3 In the <Light Pattern> group, select the lighting pattern Plane, Bar or Preset.
You can adjust the intensity of the light and other parameters with the knobs.
4 Set the parameters.
The parameters differ as follows, depending on the selected lighting pattern.
• When Plane is selected
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Light | Intensity of light in highlight area | 0.00 to 100.00 |
|
|
|
|
• When Bar is selected |
| ||
|
|
|
|
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Light | Intensity of light in highlight area | 0.00 to 100.00 |
|
|
|
|
2 | Ambient | Intensity of light in ambient area | 0.00 to 100.00 |
|
|
|
|
• When Preset is selected |
| ||
|
|
|
|
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Light | Intensity of light in highlight area | 0.00 to 100.00 |
|
|
|
|
2 | Ambient | Intensity of light in ambient area | 0.00 to 100.00 |
|
|
|
|
3 | Shade | Intensity of light in shade area | 0.00 to 100.00 a) |
a) Setting is available when nonlinear effect page turn, roll, cylinder, or sphere is selected.
Shade area
Ambient area
Highlight area
Operations DME 11 Chapter
The three regions for which the light intensity can be set
DME Special Effect Operations 65