Setup Engineering 16 Chapter
•Press directly on the list appearing in the status area.
•Press the arrow keys to scroll the reverse video cursor.
•Turn the knob to make the selection.
Knob | Parameter | Adjustment | Setting |
|
|
| values |
|
|
|
|
1 | Bank | M/E or P/P selection to which settings apply | 1 to 4 |
|
|
|
|
The selected bank appears in reverse video.
Selecting the key memory mode
In the <Key Memory> group of the Switcher>Key/Wipe/FM menu, select one from Full (full mode)/Simple (simple mode)/Off.
For more details, see “Key Memory” in Chapter 1 (Volume 1).
Selecting the processing order of masks and borders
In the <Mask/Border Process> group of the Switcher>Key/Wipe/FM menu, select one of the following.
Mask>Border: Apply the mask effect, then apply the border effect.
Border>Mask: Apply the border effect, then apply the mask effect.
Selecting the key priority operation mode
In the <Key Priority> group of the Switcher>Key/Wipe/FM menu, select one of the following.
Normal: The key priority sequence can be varied freely.
Fix: Fixed at currently set priority sequence.
Setting the operation mode of the key bus [XPT HOLD] button
In the <Xpt Hold Mode> group of the Switcher>Key/Wipe/FM menu, select any of the following.
Key Disable: The [XPT HOLD] button of the key bus functions as a key disable button. When the [XPT HOLD] button is on, recalling a snapshot or keyframe effect does not reflect the key settings, including the crosspoint selection information.
Xpt Hold: The [XPT HOLD] button of the key bus functions as a
Setting the operation mode when the pattern limit is released
In the <Pattern Limit Transition> group of the Switcher>Key/Wipe/FM menu, select either of the following operation modes.
248 Setup Relating to Switcher Processor