Setup Engineering 16 Chapter
Setup Relating to DME
Settings Relating to Signal Inputs (Input Menu)
To make settings relating to DME input signals, display the DME>Input menu.
To display the Input menu
In the Engineering Setup menu, select VF4 ‘DME’ and HF1 ‘Input.’ The status area shows the initial crop information.
In the following, the settings for DME1 are explained. (It is not necessary to make settings for DME2.)
Setting the initial crop
Use the following procedure.
1 In the DME1 <Aspect> group, select the screen aspect ratio (16:9 or 4:3).
2 In the DME1 <Crop> group, press [Initial Crop] and adjust the following parameters.
If you selected 4:3 in step 2
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Top | Position of top side | |
|
|
|
|
2 | Left | Position of left side | |
|
|
|
|
3 | Right | Position of right side | |
|
|
|
|
4 | Bottom | Position of bottom side | |
|
|
|
|
If you selected 16:9 in step 2 |
| ||
Knob | Parameter | Adjustment | Setting values |
|
|
|
|
1 | Top | Position of top side | |
|
|
|
|
2 | Left | Position of left side | |
|
|
| +16.00 |
|
|
|
|
3 | Right | Position of right side | |
|
|
| +16.00 |
|
|
|
|
4 | Bottom | Position of bottom side | |
|
|
|
|
To return the parameter values to their default values
Press [Unity] in the <Crop> group.
260 Setup Relating to DME