Repeat steps 2 and 3 as required to make the settings for other regions.

Setup Engineering 16 Chapter

Setting user regions

Note

If you change the user region settings, the previously stored snapshot data and keyframe effect data can no longer be used.

Use the following procedure.

1 In the Switcher>Config menu, press [User1-8 Config].

The User1-8 Config menu appears. The status area shows the region names and assigned user region numbers.

2 Using any of the following methods, select the region you want to set.

•Press directly on the list in the status area.

•Press the arrow keys to scroll the reverse video cursor.

•Turn the knob to make the setting.

Knob

Parameter

Adjustment

Setting values

 

 

 

 

1

Region

Region selection

1 ...

 

 

 

 

3 In the <User Region Assign> group, select the user region you want to assign. If you do not want to assign a user region, select [No Assign].

4

5 To confirm the setting, press [Execute]. To cancel the setting and return to the original state, press [Clear] without pressing [Execute].

When you press [Execute], a confirmation message appears.

6 Press [Yes].

This assigns a region to a user region.

Assigning PGM/PST logically to an M/E

Use the following procedure.

1 In the Switcher>Config menu, press [Logical M/E Assign].

The Logical M/E Assign menu appears. The status area shows the physical M/E and logical M/E organization.

238 Setup Relating to Switcher Processor