Toshiba VP 300S manual Using Install, Using Update, From Update you can LET and Modify

6.4

HOW TO CObJFlGURE THE CSTAT TABLE FOR THE PDL INDEX VALUE

The PDL index value is the first entry in the CSTAT Table. It is automatically defined with a. default Personal Distribution List index value of NONE for each mailbox COS defmed in the Toshba VP System configumtion. This index value does not apply to port/trunk COS.

	l
Use the UPDATE program to modify the PDL index value for a mailbox COS.	.

- _

ENTRY R

PDL INDEX VALUE

The only entry in the CSTAT Table is the PDL index value. It is entry ?#l.

The index value for a COS represents the maximum number of PDL members, if any, allocated for each mailbox in that COS. Validindex values are shown in the chart in the previous section of this chapter.

[D If a mailbox has a COS with a non-zero PDL value and has PDLS d&med, then that mailbox is moved to a COS with a zero PDL value, the defied PDLs are no longer available.

If, however, the mailbox is moved into a COS with a lower index value than that originally assigned, all entries in that mailbox’s PDLs remain valid. New entries cannot be defmed beyond the limits specified for the currently assigned COS.

	‘\,:
Using INSTALL	LS
	2: ?

There are no questions pertaining to the CSTAT Table in the INSTALL program. To modify CSTAT entries, use the UPDATE program.

Using UPDATE

From UPDATE you can LET and MODIFY.

LIST Listing the CSTAT Table