Toshiba VP 300S manual ‘1.3, Abcdefghijklmnopqrstuvwxyz

						UNDEF?STANDlNG	CONFIGURATION	l-3
							w
‘1.3		ASSURING SECURITY
		Password protection assures that		only authorized	vns	are allowed to access the ?bshiba
		VP System software.
		I&words are not set by the manufactures. To assure the security of the qstem, immediately set
		passwords for all levels. kzwords are changed from the terminal at the Operating S$tem level
		@ ~~~P~~
		mrds	can contain up to eight	alphanumeric	characters. The following		are valid alphanumeric
		characters:
- -	-	0123456789

ABCDEFGHIJKLMNOPQRSTUVWXYZ

The following are the three password levels followed by their description and instructions on how to set them:

l

l

l

Maintenance	Full system access
Mminiitive	Axess to the UPDATE program	and	to all reports
Report	Access only to Reports	..

m Maintenance

This level allows full accessto system diagnostics, error information, and the INnALL and

wDATE programs. All reports may be listed and cleared. The Maintenance, Administrative,

and Report passwords may be set at this level.

At the @prompt, type:

PASS Maew password>

For example,

@PASS l4 53lmP9

where ‘Y3lNL%J” is the new Maintenance password.

=Administrative

This level allows entrance into the UPDATE program and allows the LIST and CL-I!N? commands to be used for the Hardware Error Bble, Pegs, and all reports. JNSTALL cannot