Toshiba VP 300S manual To the called, Send EXTENSION/MAILBOX to PBX Before Cawng, Yes/No

34TRANSFER CALLS WITHOUT CHECKING FOR BUSY OR NO ANSWER (May be assigned to PORlJ

The	Toshiba VP System automaticaliy	makes an unscreened	transfer	to the called	.	‘:
extension when a COS has this attribute. This allows the Toshba VP System to
offer	callers the option of %unping-+n”	to a busy extension	in mrne	PBXs.

DI Not all PBS allow transfer to busy exten&ns. Some may permit it, bat it is

not desirabIe (caller hears busy until they &oose to disco~ec!tJ This is speciGicallydesigned for PBXs offering the ability to camp-on by ‘?skning” to busy tone for a certain amount of time.

38PORT REQUIRES AN ACCOUNT CODE/hWLBOX IS AN ACCOUNT CODE (Incoming Call Restriction - Accounl Codes) (May be assigned to PORT)

When this attribute is assigned to a port, an Account Code is required before the port can be used for calling extensions, logging on, or leaving quick messages When assigned to a maiRxx the mailbox becomes an Account Code. Ma&axes with this attribute cannot receive messages or be logged on to. Refer to the F&WC De.sc+& manud - INCOMING CALL RESlXICl”ION.

37DO NOT CHECK USERS TABLE FOR ACCOUNT NUMBER

(Incoming Call Restriction - Account Codes) (May be assigned to PORT)

When this attribute is assigned, the Account Code entered does not have to bein the USER %ble. The Account Code is not checked, it is just sent to the PBX..

38SEND EXTENSION/MAILBOX TO PBX BEFORE CAWNG

(incoming Call Resktion - Account Codes) (May be assigned to PORT)

When this attribute is ass@ed, the called mailbox or extension .&its are sent to the PBX according to the following rule.:

l	If an extension number is associated with a mail&	the extension number is
	sent to the PBX.

lIf there is no extension, the digits the caller entered (the mailbox number) are sent to the PBX.

.::

:

.,%,.c

..-

System Parameter 128 interacts with Attribute 38 by either defining the maiIbox as the digits always sent to the PBX (l2.8-YES) or allowing the extension to be sent, if it exists. (12%NO).

HZ%EXt	Sys Par 128	Send to PBX
Yes	YeS	MaiIbox
Yes	No	Extension
No	Yes/No	MaiIbox

39MAY NOT CALL OPERATOR BEFORE ACCOUNT CODE IS ENTERED (Incoming Call Restriction - Account Codes) (May be assigned to PORT)

When this attribute is assigned, the attendant can not be c&d unless an Account

Code is entered. The prompt says “G&+e”if an attempt is made to call the attendant without entering an Account C&e.