Toshiba VP 300S manual PBX Provides Stutter Dial Tone

22-l 6 Configuration hb-ud

-

This parameter applies to messages left after calling a busy and/or no answer extension, messages kft after greeting, quick messages (IntraMessaging option) and scripted prompt responses (Saipted Prompting option).

75SUBSEQUENT SILENCE MAX SEC (QUICK/SCRIPTED)

This parameter applies to messages left after calling a busy and/or no ahswer extension, messages left after greeting, and Quick Messages (IntraMessaging option) and Scripted Prompt responses (Scripted Prompting option).

76NOVICE PROMPT KEYPAD-COMMAND USAGE UMIT

77PBX PROVIDES MOMENTARY DISCONNECT

When this parameter is set to YES, if a caller hangs up and the PBX provides a momentary interruption in the loop curfent greater than 50 millkeconds, the

called port is disconnected and the call is terminated.

78

79

If this parameter is set to YES and Adaptive Integration is installed, when a call forwards to a mailbox, the caller hears “Mailbox ruu&~lnryne does not answerlis

busylis wzavailabIt~ P&se hve a pivate trzessw at the tone, diai’anoth tz&mion, or my on the line for arsktance ” If the caller stays on the line after leaving a message, the Toshiba VP System automatically sends the caller to as&stance.

If this parameter is set to YES, but the PBX does not provide momentary disconnect, the Toshiba VP System attempts to transfer a call even when the caller hangs up. Depending on the PBX, this may result in phantom calLs to the attendant.

PBX PROVIDES STUTTER DIAL TONE

This parameter cannot be modified.

LAMP MW: “ON” PRE-EXfENSION DIGITS

80 LAMP MW: ‘ON” POST-UCIENSION DIGITS