Toshiba VP 300S manual Adding Mailboxes to, Distribution Lkts and Extended

DISTRIBUTiON LIST Table Q-7

-

Llstlng eIl Dlstributlon Lists associated wtth a specific network address

This command applies only to multi-c&met or remote networking systems. lh produce. a printout of the pilot numbers of all lists of which a qecific network address is a member, enter the entire network ma&ox number or the network initial digits. ’

ADD	Adding Mailboxes to	Distribution Lkts and Extended	Mailboxes
	New lists and additions	to existing lists are made through	this

command. All pilot or member mailboxes must first exist in the USER Table.

If the Distribution List number already exists, any entered mailboxes are added to the existing list.

IlY When adding a network number and mailbox to a Distribution

List, the following prompt is displayed:

The prompt is a reminder that the mailbox must exist at the network location in order for the message to be sent.

MODIFY Modifying Distrlbutlon Ust T&e

This command applies only to systems quipped with IntraMessaging.

For Toshiba VP systems without Intrah4essaging, Distribution Lists are