Toshiba VP 300S manual 1UNDERSTANDING Update, Update Commands, List

UPDATE 3-l

w

3.1UNDERSTANDING UPDATE

Adds, changes, and deletions of information are mmplished lWough the IPDATE program. Use of UF’DATE does not impact system operation.

n UPDATE Commands

The following commands are used in the WDATE program. To use the commands with each configuxatiort tabI& refer to the specifii table section of this chapter.

LIST	Use LIST to print or display information stored in the	Toshiba
-	VP System database. T%is is the information you entered		during
	INSTALL and the default values. To obtain a printout	of	the entire
	database, at the dot (.) prompt, enters

When listing the entire database, each COS is shown with only the

SCHEDULE and INFORMKI-iON Tables pertaining to that COS.

To obtain a printout of any of the tables at the dot (.) prompt, enteE

L (TABLE NAME) (MODIFIER) 1-j

MODIFY

F’ressE] at any time during a listing to stop printing. (A few lines may print before printing stops.)

Use MODIFY to change information in a table: correct a mistake made during INnALL, alter default information, change the system date and time, and mod@ an existing entry. To MODIFY, at the dot

(.) prompt, enters

-

M (TAEiLE NAME) (MODIFIER) -1

Use this command to change the system date and time.

M DATE