Toshiba VP 300S manual CWESTiONSFOROTHERPHONE Systems

2-18 Coni’Tguratim Mmuai

m

2.3 CWESTiONSFOROTHERPHONE SYSTEMS

I&all asks the following questions when your phone system manufbctnrer or PBX nmciel number

isnotlistedillqmstion Ia.

	Enter the sequence of events when transferring a call prior to dialing the destination extension.
	For example, if you ‘Ylash,” wait for dial tone, then c%althe extension, type FE. (If the phone
- -	hookwitch is depressed xnornenta.rily, that is amidered a flash.)

Enter the sequence of events done to reconnect to the original caller. This is usually similar to the previous answer. For example, if FE is done to transfer, aK r (flash)is probably used to remnnect.

Tjpe the digi% if any, required to complete a transfer. If there are non% press -1.

Ringback is the smnd you hmr in the receiver when the phone you are calling is ringing.

Standard ringback is one ring alternating with silence. Double-intempted ringback is two short rings and then silence.

,

.,’

At this pint, INSTALL continues with question lb, Company Name. .