Toshiba VP 300S manual Tabase, at the dot . prompt, enter, Promph enters

UPDATE 3-l

m

3.1UNDERSTANDING UPDATE

Adds, changes, and deletions of information are aax)mplished *&rough the UPDATE program.

Use of UPDATE does not impact *em operation.

w UPDATE Commands l *-

De following commands are used in the UPDATE program. Tb use the commands with each configuration tabI% refer to the specific table section of this chapter.

LIST	Use IJST to print or display information stored in the Toshiba
	VP System database. This is the information you entered during
	lNSTALL and the default values. To obtain a printout of the entire
	&tabase, at the dot (.) prompt, enter

When listing the entire database, each COS is shown with only the

.SCHEDULE and INFORMATION Tables pertaining to that FOS.

iz$tsy

75 obtain a printout of any of the tables, at the dot (.) prompt, enters

L (TABLE NAME) (MODIFIER) -1

MODlPf

Press I=] at any time during a listing to stop $rA.ngw (A few lines may print before printing stops.)

Use MODIFY to change informaGon in a table: correct a mistake made during INSTALL, alter default information, change the system date and time, and modify an existing entry. To MODIFY, at the dot

(.) promph enters.

M (TABLE NAME) (MODIFIER) j==]

Use this wmmand to change the system date and time.

bl DATE