Toshiba VP 300S manual 11.2HOW the Firstdigit Table is Used

-

11-2 Configuration Maid

11.2HOW THE FIRSTDIGIT TABLE IS USED

The Toshiba VP System and many PBXs use FIRSTDIGIT Tables to determine: .

l

l

Whether the firs digit is valid, and

+“

How many digits to expect before completing a call.

The fmt digit entry in the FIRSI?)IGIT Table is defined when the first mailbox starting with a given digit is entered in the USER Table. Vtid mailbox first diit numbers are 1 - 9. A ma&ox number cannot begin with the digit 0, however, extensions in the USER Table can begin with the digit 0. All mailbox numbers starting with the same digit must be the same length.

For exampIe, if all mailboxes starting with 4 are three digits long:

lIf caller enters valid mailbox q m m

lIf caller entea (oa a), or a digit not in the USER Table

The Toshiba VP System refers to the USER Table for the extension to call.

The Tbshiba VP System waits for two (or one) more digits. The Toshiba VP System

prompts: “Extension four (orfo*@e) is invnlid You may now dial another emnsion

nmberordialzeroforassi5tancq.” Ifa Custom Error prompt is recorded, it plays instead of the generic prompt.