Toshiba VP 300 DetInttlon ‘Ike Alternate, Mailboxes not defined in the User Table Usage, On a

				INFORMATION	Table - 13-Q
/	10 USE ALTERNATE TRANSFER CODES2
	DetInttlon:	‘Ike Alternate	Bansfer	Codes are used when transferring callers to
		mailboxes not defined in the USER Table.
	Usage:	‘lb call a ma&x	on a	network where the CO trunks	terminate on
		one lbshiba VP System but the mailbux is at another location. If the
		location is over TIE lines, a different transfer string may be required
		to complete the calL			..-

Example:

To Configure:

Considerations:

18NDCT MAILBOX Deflnitlon:

Usage:

If special axles are require4 they are inserted prior to sending*the digits entered by the caller.

ForportswiththisvaluesettoYES,the~VPSystemuses

the axles defined in the SYSTEM PARAMETER Table.

Used only when mailbax is not defined in the USER Table.

Enables callets to automatically be sent to another mailbox for information, or to another extension for as&axe.

When answering a call, the Toshiba VP System plays the Campy Greeting defined for the port the call came in on. If a Next Miilbox - is defined, the lbshiba VP System automaticallygoes to this Mailbox after playing the Company Greeting. If no Company Greeting Bdsts, the call is immediately directed to the Next MAiMx.

Example:

To Configure:

Considerations:

Setting up a port to take messages, to give information and disconnect, or to connect to a specific mailbox or extension.

Enter the mailbox number of the Next Mailbox in the INFORMATION Table of the ma&ox callers are sent from.

Attribute 27 - AFTER GREETING PIAYS, GO TO NEXT GREETING OR MAILFJOX, is not assigncA to the port. For pork, if this index is defined, the Toshiba VP System automatically goes to the Next Mailbox.

Indexes 26 and 27 are used only with Personal Assistance or Adaptive Integration. Refer to the Feature Description manual - CUSTOMIZATION, Personal A&stance, Configuring Auto-Transfer to Assistance.

2

Port index

used

only when

caller

enters

valid digits

not

defined in

LJSERT~~~

(valid

first

digit

and correct

kngthj.

If the

mailbox is

defined

in the

USERTabk,

the

JNi3RwTION

Tabk

for that

CDS

is

used.