Toshiba VP 300S manual Iv This parameter is used only for German language prompts

.

>

set to YES, the ‘Rshiba VP System ignores a loss of loop current at the start of a call for the time interval specified in this parameter. If no line current is flowing after this time, the Toshiba VP System treats this as ‘if a loop current has been interrupted.

156APPUCATlON PROCESSOR MESSAGE POOL DISTRlBlJTiON LIST olhvorks)

157SPEAK DISCRETE VERSIONS OF NUMBERS 21- 59

Iv This parameter is used only for German language prompts.

158 OFFSlIE MW CALL LlMlT ABSOLUTE NOT DAILY

L!Y This parameter works in conjunction with INFORMATION Table Index 14 - OFF-SlTE ATTEm TIMES, which establishes the number of times per day offsite message waiting notification should be attempted;

If this parameter is set to YES, the number of offsite MW attempt times does not restart each day. After the system has tried offsite message waiting notification the number of times set in INFORMATION Table Index 14, offsite notification does not begin again until the mailbox is logged on to and a new message is received.

159OFFSlTE MW CALLS WORK LIKE INT (DETECT BUSY)

Iu This parameter works only if network busy is the same as PBX busy.

160QUICK BUSY TEST

tt3’ This parameter is used only in Germany. Could cause caller to be dropped on false detection of busy.

161MODEM ACCESS PORT (0 = ALL PORTS OK)

W If this parameter is set to a non-zero value, modem access is restricted to the designated port. The designated port could be dedicated to modem access for security reasons.