Toshiba VP 300S manual Numbering Plan Table for MULTI-CABINET Networking

NUMBERING PLAN T&e 16-l

-

16.1NUMBERING PLAN TABLE FOR MULTI-CABINET NETWORKING

Multi Cabinet Networking refers to situations where more than one Toshiba VP System is linked together behind one PBX at one location.

For each cabinet in the mu&cabinet network, the NUMBERING PUN Table d&m-.

	•
	•
	•
- _	0

Location of each system on the network

Initial digits dialed to reach that location

Mailbox length on the co-located cabinet

Number of digits to strip (always zero for co&cat&i cabinet entries)

Example of a NUMBERING PLAN Table:

nHow the NUMBERING PLAN Table is Used

The NUMBERING PLAN Table contains the initial digits dialed by the caller, which determine where to route the call The NUMBERING PLAN Table also defines the length of mailboxes

on each cabiiet.

B How to Configure the NUMBERING PLAN Table

A maximum of 511 entries may be defined in the NUMBERING PLAN Table.

NETWORK LOCATION NAME

iNITlAL DIGITS EXPECTED

The name of each cabinet on the network. The location name must be defined in the LOCATION Table before it can be entered in the NUMBERING PLAN Table. For co-located systems, the same location name can be entered multiple times with different initial digits expected.

p In remote networking, Self, as a locdtion name, is used to identify the cabinet currently being configured. Self is not needed in multi-cabinet networking. It is used only in remote networking.

Leading digits specific to mailboxes on each abinet. Generally, either a unique digit or two unique digits are defined.