Toshiba VP 300S manual Outcall

h.ltemal cdl.5

When the PBX allows forwarding of internal calls only, stations can be forwarded to CX ports for internal messaging. This enables an employee to leave a message for an unavailable station without first calIing the lbshiba VP System. Remember, callers need to, know the extension number to leave a message. callers who came through the operator, and then are forwarded to CX ports, may not )cnow the

extension number. I’-

MxMessage Center (Message-Taking only)

Callers who have reached the attendant and want to leave a message for someone can be transferred to that person’s ma&ox. The caller is extended to the Tw VP System only to leave a message rather than call the extension.

The attendant transfers the caller to an MX port, then enters the mailbox number. After a short delay, the Toshiba VP System prompts: “Please leave a privare messuge for . . . RecoraYng, beep. ” Some PBX consoles do not generate tones. Therefore, a tone generator is required for the console operator.

*

OUTCALL

OutcaIl is used to enable or disable the ability of each port to place Network or Message Waiting Notification calls.

mSome PBXs require the same port/extension to activate and deactivate the message waiting lamp. To do this, define System Parameter 106 - LAMP MESSAGE WAITDIGPORT, with the port number to use.

TEST

Test enables or disables the Toshiba VP System selftest routine. This field should be YES unless you have consulted with your technical support group about special cases when selftest should not be performed.