Toshiba VP 300S manual EnteranEfor%xpectdialtone.~ Donotuseanyspaccs While, If None, All

can be on or off premise. Include access codes, if neu%sary. Enter a D for a delay, after any aces codes you may use. (The length of the delay is determined by -em I%rameter 28.)

EnteranEfor%xpectdialtone.~ Donotuseanyspaccs

While	the Tixhiba	VP System is reloading			after a power		failure	the ports can be fMed	to
an alternate answer point.			Enter the	code that		causes incoming calls to ring at the alternate
answer bcation.		If NONE	is entered,	all	ports	remain	off hook	Busy) when the ystem	is
loading	or rebadin&

The ver to this question defmes the value for System Parameter 144 - hfiIMuM

LENGTH FOR SECURllY CODES. The maximum Iength for a security code is 10 digits.

.,

All new mailboxes entered must have a security code of the minimum length. Existing security codes with fewer digits are not affected untiI the mailbox holder changes the security

de. When a new security code is assigned, it must comply with the minimum let@.

XXis the vahte defmed in question g for System Brameter 144 - MIl~D4Llhi LENGTH FOR SECURITY CODES. NONE is not allowed if the minimum length is greater than zero.

Enter a security code to be used for alI mailbox- as welI as ail new maiIboxes entered into the USER Table. This security code remains on each n&box untiI a user logs on to the mailbox and changes it-

The security code assigned through this INSTALL question can be changed or deleted through System Parameter 105 - DEFAULT SECURITY CODE FOR NEW MAlLBOXE3. If the value of this parameter is modified, any existing mailboxes which already have the default security code are automatically assigned the new default security cede.