Toshiba VP 300S 7USING the Configuration Package, Howto Use the ConfIguratIonPackage, Diagram

1.7USING THE CONFIGURATION PACKAGE

Howto Use the ConfIguratIonPackage

1. Write a brief description of the application. Drawing a blockdiagrammayhelp. Includein

the diagram:

l

lThe companygreetingfor each Tbshiba VP System port.

lThe attendant, intercepk or persona3 a&stance position where callers wil! he directed if they enter nothing or have rotary dial .

l

l

The answering mode for each port group.

The different types of mailboxes.

2Collect information and complete the top portion of the General Information form star@ with “PBX Manufacturer.”

3.Determine which trunks will he directed to each port group (if appropriate). For mh port, determine:

l

l

l

l

Phone system extension number.

Aswer mode (AX, CX MX).

Whether the port should be used for outcalling.

If selftest should he disabled.

4.Assign a Class of Setvice (CCIS)for each group of ports. (%oshiha recommends numbering

port COS from 127 in descending order, i.e., l27, l&125,...) Complete the PORTS section of the General Information form.

iI3 For systems that are integrated, the Port INFORMATION Table may also be used for the Trunk INFORMATION Table.

5.For each port group, spy the appropriate number of blank COS for mRTS form. On each form:

.

.

l

l

Enter COS number.

Briefly describe port type: trunks answered, etc.

Enter list of ports that this COS applies to.

SCHEDULE Table	Same number	as CO&	determine	days of week and start
	and stop times. &sign		an INFORMATION		Table (l-255)	for
	each. Assign	an INFORMATION		Table for	the “default”	(all
	other times).

.	INFORMATION	Table	Refer to INFORh4ATION	Table in this manual, as needed	.j	..-
			to answer index items.