Toshiba VP 300S manual HOW the Slots Table is Used, Tine Cards

21.2HOW THE SLOTS TABLE IS USED

The SLOTS Table is used to configure each port on a line card and integration card.

ntine Cards

- _

Each VP3OWVP 300 porton a line cud is norma••y conneded toa specif’ic PBX qtension. For non-integrated systems, the port extensions must be set up in one or more hunt groups in the PBX. Each hunt group can be con&u.red to handle calls differently. For integrated systems, refer to the Innollatio and Mae manual - ADAPTIVE INTEGRATION, for configuration details.

The following explains each line card entry in the SUNS Table:

-SKIT

CARD NPE

PORT

EXTENSION #

specifies the slot number.

Spedks the type of line card installed.

Specifies the port number on the line card.

Defines the PBX extension number for each port* on the line card. A mailbox extension number cannot be the same as a port extension number.

cosDirects the VP 3OOsNP 300 to other system tables for the days and times to activate features and where to get further instructions for

handling the call. -

PFor consistency and clarity, assign port COS from 127 in descending order and Mailbox COS from 0 (zero) in ascending order.

MODEDetermines how the VP 3OWVP 300 handles the call when that port answers.

The following is a brief description of each answering mode. For further details refer to the Feume Description manual, GENERAL DFSCRIFT-ION.

AX Mode - Primary Answering

All trunks directed to AX ports are answered by the

VP %MVF’ 300. Callers are asked to enter the extension number