Toshiba VP 300S manual Location Table for Remote Networking

LOCATION Tath 14-5

14.2LOCATION TABLE FOR REMOTE NETWORKING

Remote Networking refers to situations where Toshiba VP Systems re located at different locations behind different phone systems. Remote networking requires the optional SW-X0004.

The LOCATION Table for remote networking contains the name of each location on the network, the route choices to access it, whether the location has a lbshiba VP System, if it ti,,on the same PBX, and the public or TIE network numbers required to access each location.

Example of a LocATION Table:

mThe Tmhiba VP System can process a call to a location without a Toshrba VP System. If the remote location has a PBX of the same type as the one placing the call, the Toshiba VP System waits for answer detection to ensure that the call is successfully completed. In the above example, AtIanta is a location for a site without a Toshiba VP System.

B How The LOCATION Table Is Used

The LOCATION Table specifies the route choices and the public or TIE line numbers to use to call the Toshiba VP System at other locations.

nHow to Configure the LOCATION Table

A maximum of 498 locations may be defmed in the LOCATION Table.

LOCATION NAME

ROUTE CHOICES

Descriptive name to identify each location on the network.

Name of the routes used to access the location. Up to three route choices may be defined for each location.