Xerox Printer fwww In the manual feeder, Notes

For paper smaller than Letter-sized, return the paper guides to their original positions and adjust the paper length guide and paper width guide.

Notes

• Do not push the paper width guides far enough to cause the material to warp.

•If you do not correctly adjust the paper width guides, it may cause paper jams.

5Close the paper cover.

6Slide the tray 1 back into the machine.

In the manual feeder

The manual feeder can hold special sizes and types of print material, such as transparencies, postcards, note cards, labels, and envelopes. It is useful for single page printing on letterhead or coloured paper.

To load paper in the manual feeder:

Caution

• When you do the printing job from the manual feeder, clear the paper in the tray 1 away.

1 Load the paper with the side to be printed on facing up.

Depending on the media type you are using, keep the following loading guidelines:

•Envelopes: Flap side down and with the stamp area on the top left side.

•Transparencies: Print side up and the top with the adhesive strip entering the machine first.

•Labels: Print side up and top short edge entering the machine first.

•Preprinted paper: Design side up with the top edge toward the machine.

•Card stock: Print side up and the short edge entering the machine first.

•Previously printed paper: Previously printed side down with an uncurled edge toward the machine.

5.8 <Loading originals and print media>