Xerox Printer fwww manual Message

Message	Meaning	Suggested solutions
	Stop/Clear has been
[Stop Pressed]	pressed during an	Try again.
	operation.
		To cancel the fax job,
		press the Enter
		button to accept Yes.
	Your machine’s	If you want to send
		those pages that
Cancel?	memory has become	have been
Yes	full while trying to	successfully stored,
	store an original into	press the Enter
	memory.	button to accept No.
		You should send the
		remaining pages
		later, when memory is
		available.
	Connection with the	Check the server
Connection Error		settings and the
	SMTP server failed.
		network cable.
Data Read Fail	Time expired while	Try again.
Check USB Mem.	reading data.
Data Write Fail	Storing to the USB	Check the available
Check USB Mem.	memory failed.	USB memory space.
		Unplug the power
Deve Home	There is a problem in	cord and plug it back
		in. If the problem
Sensor Error	the fuser unit.
		persists, please call
		for service.
	The loaded original	Clear the jam. See
Document Jam	has jammed in the
		page 14.1.
	ADF.
	The front cover or	Close the cover until it
Door Open	rear cover is not
		locks into place.
	securely latched.
Enter Again	You entered an	Enter the correct item
	unavailable item.	again.
File Format	The selected file	Use the correct file
	format is not
Not Supported		format.
	supported.
Fuser Fan	There is a problem in	Open and then close
	the cooling fan of the
Locked		the front cover.
	machine.

Message	Meaning	Suggested solutions
	You have tried to
	select a group
	location number	Use a speed dial
	where only a single
Group Not		number or dial a
	location number can
		number manually
Available	be used, such as
		using the number
	when adding
		keypad.
	locations for a
	Multiple Send
	operation.
Install	The colour toner	Install the colour
	cartridge is not
[Color] Toner		toner cartridge.
	installed.
Install	The corresponding	Install the part into
	part of the machine
[Part]		your machine.
	is not installed.
Invalid	The colour toner	Install the a Xerox-
	cartridge you have	genuine colour toner
[Color] Toner	installed is not for	cartridge designed for
	your machine.	your machine.
Invalid	The colour part of	Install the a Xerox-
		genuine part
	the machine is not
[Part]		designed for your
	for your machine.
		machine.
	The receiving fax	Try again after a few
Line Busy	machine did not
	answer or the line is	minutes.
	already engaged.
		Unplug the power
Low Heat Error	There is a problem in	cord and plug it back
		in. If the problem
Cycle Power	the fuser unit.
		persists, please call
		for service.
	A problem has	Unplug the power
LSU Hsync Error		cord and plug it back
	occurred in the LSU
		in. If the problem
Cycle Power	(Laser Scanning
		persists, please call
	Unit).
		for service.
	A problem has	Unplug the power
LSU Motor Error		cord and plug it back
	occurred in the LSU
		in. If the problem
Cycle Power	(Laser Scanning
		persists, please call
	Unit).
		for service.
Main Motor	There is a problem in	Open and then close
Locked	the main motor.	the front cover.

14.6 <Troubleshooting>