Reduced or enlarged copy
By using the Reduce/Enlarge button, you can reduce or enlarge the size of a copied image from 25% to 400% when you copy original documents from the scanner glass, or from 25% to 100% from the ADF.
To select from the predefined copy sizes:
1Press Reduce/Enlarge.
2Press Reduce/Enlarge or the Scroll buttons until the size setting you want appears and press Enter.
To scale the copy by directly entering the scale rate:
1Press Reduce/Enlarge.
2Press Reduce/Enlarge or the Scroll buttons until Custom appears and press Enter.
3Enter the scale rate and press Enter to save the selection.
Note
• When you make a reduced copy, black lines may appear at the bottom of your copy.
Changing the default copy settings
The copy options, including darkness, original type, copy size, and number of copies, can be set to those most frequently used. When you copy a document, the default settings are used unless they have been changed by using the corresponding buttons on the control panel.
1Press Copy.
2Press Menu until Copy Setup appears on the bottom line of the display and press Enter.
3Press Enter when
4Press the Scroll buttons until the setup option you want appears and press Enter.
5Press the Scroll buttons until the setting you want appears and press Enter.
6Repeat steps 4 through 5, as needed.
7Press Stop/Clear to return to Standby mode.
Note
• While you are setting copy options, pressing Stop/Clear cancels the changed settings and restores the defaults.
Using special copy features
You can use the following copy features:
Collation
You can set the machine to sort the copy job. For example, if you make 2 copies of a 3 page original, one complete 3 page document will print followed by a second complete document.
1Press Copy.
2 Load originals face up into the ADF.
For details about loading an original, see page 5.1.
3Enter the number of copies using the number keypad.
4Press Menu until Copy Feature appears on the bottom line of the display and press Enter.
5Press Enter when Copy Collate appears.
6Press the Scroll buttons to select the colour mode you want.
There are two modes as follows:
7Press Enter to begin copying.
One complete document will print followed by the second complete document.
6.2 <Copying>
