Maintenance Parts
To avoid print quality and paper feed problems resulting from worn parts and to maintain your printer in top working condition the following items will need to be replaced at the specified number of pages or when the life span of each item has expired.
Items | Yield (Average) | |
|
| |
ADF rubber pad | Approx. 20,000 pages | |
|
| |
Transfer belt | Approx. 60,000 images | |
|
| |
Transfer roller | Approx. 100,000 pages | |
|
| |
Fuser unit | Approx. 100,000 black pages or | |
50,000 colour pages | ||
| ||
|
| |
Tray rubber pad | Approx. 250,000 pages | |
|
| |
Pickup roller | Approx. 50,000 pages | |
|
|
Xerox highly recommends that an authorized service provider, dealer or the retailer where you bought printer performs this maintenance activity.
Checking replaceable parts
If you experience frequent paper jams or printing problems, check the number of pages the machine has printed or scanned. Replace the corresponding parts, if necessary.
The following information are available for checking the replaceable elements of your machine:
•Supplies Info: prints the supply information page.
•Total: displays the total number of pages printed.
•ADF Scan: displays the number of pages scanned using the ADF.
•Platen Scan: displays the number of pages scanned using the scanner glass.
•Imaging Uint, Transfer Belt, Fuser, TransferRoller, Tray1 Roller, Tray2 Roller : displays the number of pages printed each item.
To check the replaceable parts:
1Press Menu until System Setup appears on the bottom line of the display and press Enter.
2Press the Scroll buttons until Maintenance appears and press Enter.
3Press the Scroll buttons until Supplies Life appears and press Enter.
4Press the Scroll buttons until the item you want appears and press Enter.
5If you selected to print a supply information page, press Enter to confirm.
6Press Stop/Clear to return to Standby mode.
Replacing the ADF rubber pad
You will need to replace the ADF rubber pad when there seems to be a consistent problem with paper pickup or when its specified yield is reached.
1Open the ADF cover.
2Rotate the bushing on the right end of the ADF roller toward the ADF and remove the roller from the slot.
1
2
1 bushing
2 ADF roller
3Remove the ADF rubber pad from the ADF, as shown.
1
1 ADF rubber pad
4Insert a new ADF rubber pad into place.
13.10 <Maintenance>
