Cisco Systems 15454M6DC Procedure: Create a Static Route

4-8
Cisco ONS 15454 Installation and Operations Guide
November 2001
Chapter4 IP Networking
ONS 15454 IP Addressing Scenarios
Figure4-6 Scenario 5: Static route with multiple LAN destinations
Procedure: Create a Static Route
Use the following steps to create a static route.
Step 1 Log into the ONS 15454 and select the Provisioning > Network tabs.
Step 2 Click the Static Routing tab. Click Create.
Step 3 In the Create Static Route dialog box enter the following:
•Destination—Enter the IP address of the computer running CTC. To limit access to one comput er,
enter the full IP address (in the example, 192.168.1. 100 ). To allow acce ss t o al l c om pute rs on t he
192.168.1.0 subnet, enter 192.168.1.0 and a subnet mask of 255.25 5.2 55.0. You can enter a
destination of 0.0.0.0 to allow access to all CTC computers that connect to the router.
CTC Workstation
IP Address 192.168.1.100
Subnet Mask 255.255.255.0
Default Gateway = 192.168.1.1
Host Routes = N/A
Router #1
IP Address of interface ”A” to LAN “A” 192.168.1.1
IP Address of interface “B” to LAN “B” 192.168.2.1
Subnet Mask 255.255.255.0
ONS 15454 #2
IP Address 192.168.2.20
Subnet Mask 255.255.255.0
Default Router = N/A
Static Routes = N/A
ONS 15454 #1
IP Address 192.168.2.10
Subnet Mask 255.255.255.0
Default Router = 192.168.2.1
ONS 15454 #3
IP Address 192.168.2.30
Subnet Mask 255.255.255.0
Default Router = N/A
Static Routes = N/A
LAN B
LAN A
Int "A" Int "B"
SONET RING
55251
Static Routes
Destination 0.0.0.0
Mask 0.0.0.0
Next Hop 192.168.2.1
Cost = 2
LAN C
LAN D Router #3
Router #2