Project Name field
This is the name of the project database. You can change the database name, but is recommended it remain as the name of the database. This field is used in many reports to identify the installation the data is associated with.
System Type field
Valid choices are NEAX IPX, NEAX IPX DM, UNIVERGE IPX, UNIVERGE
SV7000, and NEAX IPX UMG.
Dual CPU check box
Select to identify when redundant SV7000 T10 processors are used.
Dual Time Division check box
Select to identify when redundant SV7000 T10 processors are multiplexing.
6 Unit (6U) Physical Chassis check box
NOTE
• Checked - Indicates 6U Physical Chassis’s are to be used.
• Unchecked - Indicates 9U Physical Chassis’s are to be used
System Options section
This section determines how the system will be programmed, and what commands will be used. It is used in reporting and consists of:
•Fusion - Use the Fusion
—NCN - Network Control Node (Fusion Network NCN)
—LCN - Local Control Node (Fusion Network LCN)
—Standalone - NEAX IPX/IPX DM or UNIVERGE IPX only
•Fusion Point Code (LCN Only)
If the system is to be an LCN in a Fusion Network, select an appropriate Fusion Point Code. It is useful to provide a technician this information so the system can be configured to support these features.
•Attendant
—Access to Attendant (Operator Call) - This is the number of the company’s operator. This number will be referenced in several areas as a macro. It is used heavily in templates such as Call Forwarding.
—Use Monitored Number as Attendant
MA4000 Installation Manager User Guide - Revision 6
