![](/images/new-backgrounds/1158244/158244193x1.webp)
Hardware Information |
Edit button
Edit the circuit card selected, changing the fields as needed. When you are satisfied with the changes made, click the OK button to save the changes.
Circuit Card Field Definitions
Access to Attendant Operator | The code system users dial to |
| reach the attendant. |
ANNC Equipment# | Specifies what the announcement |
| is to be used for. For Music On |
| Hold, choose |
| Hold Tone. |
ANNC Pattern (ANP) | A .wav |
| three digit number from 000 - |
| 255. This number correlates to an |
| existing .wav file loaded in the |
| VS32, that you wish to be played |
| for the defined ANNC Equipment |
| #. |
Connection Duration | Indicates how long a caller will |
| remain connected (0 - Disconnect |
| after 30 seconds; 1 - Remain |
| connected until the caller |
| disconnects). |
Count | The number of the route that will |
| be created for this device |
DC | The number of digits to be |
| translated for incoming calls. |
| Typically, this would be set for the |
| number of digits in the station |
| numbers. |
Default Gateway Address | The IP address of your network's |
| gateway router. |
Do Not Send RingBack Tone | Selecting this option box prevents |
| sending a RBT. |
DRS Address | The IP address of the Device |
| Registration Server. |
Hardware Type | Media Gateway: |
| |
| MG 1.5M: |
| SN8110 |
IP Address | The Internet Protocol address for |
| the equipment. |
MA4000 Installation Manager User Guide - Revision 6