NEC MA400 manual Connect Type section, System Name field, IP Phone Type field, TCP/IP option

Hardware Information 5-3

•System Name field

This is the name of the system. This information will be assigned internally to the system.

•IP Phone Type field

Allows specification of the IP Phone support needed in MA4000 Installation Manager. This setting determines what options are made available in other areas of MA4000 Installation Manager.

Example: If there is no IP Phone support needed, you will not have the option of viewing IP Phone Models in the Phone Model List on the User Edit Dialog.

The IP Phone Type options will consist of a combination of the following:

TDM

Requires a PIR. Time Division Multiplex phones are NEC non-IP, circuit card based Dterm or analog phones.

IP P-P

IP Peer-to-Peer phones are NEC IP phones not requiring circuit cards.

SIP

Session Initiated Protocol are NEC or other vendor IP phones which conform to SIP standards.

•Name Display and Name Display Length fields

Specify in the Name Display and Length fields the default format for users with phones having Name Display support.

Connect Type section

This section allows you to specify the communication interface used to connect to the system.

•TCP/IP option

—Address - IP address of the SV7000 T10 or IPX

—Port - 60000

•Direct option (requires serial cable and is not used for SV7000)

—Comm Port - Serial COM port of the PC which the MA4000 Installation Manager is operating on.

—Baud Rate - Default value is 4800

MA4000 Installation Manager User Guide - Revision 6