NEC manual MA4000 Installation Manager Installation, Run

Getting Started 2-3

MA4000 Installation Manager Installation

To install MA4000 Installation Manager for the first time, use the installation CD included in your MA4000 Installation Manager package. You must run Setup from within Windows.

Be sure to close all open Windows programs and screen savers and disable any virus detection programs before using the Setup program.

NOTE

The following procedure walks you through the MA4000 Installation Manager installation. The Setup consists of a series of dialogs that supply you with default answers to questions regarding the installation of files to your hard disk. To accept the default answers, click the Next button. To make changes, click the Browse button and select a different directory, then click OK button to return to the dialog box.

The following procedure assumes you are starting the Setup program from your computer’s CD-ROM drive D:. If you start from a different drive, substitute the letter of that drive in this procedure.

Step 1 Launch Microsoft Windows 98, Windows 2000 or Windows XP

Professional.

Step 2 Place the MA4000 Installation Manager CD in the CD-ROM drive.

Step 3 Click the Windows Start button and select Run.... from the pop-up menu.

The Run (Figure 2-1) displays.

Figure 2-1 Run

Step 4 Type D:\Setup in the Open text box (as shown in Figure 2-1) and click the OK button. The Installation Manager R24 - InstallShield Wizard Welcome displays (Figure 2-2).

MA4000 Installation Manager User Guide - Revision 6