Setup IP... button

5-4 Hardware Information

The User ID and Password fields can be used if authentication is required.

The following options can only be used after the software has been successfully installed and the system is online.

NOTE

Clicking the Test button performs a verification of the system connection selected. If the test connection fails, Figure 5-2displays.

Figure 5-2Test Connection - Login Failed

		Setup IP... button
		Clicking the Setup IP ... button allows the user to configure the IP
		address, subnet mask, default gateway, speed, and duplex mode, if
		applicable. The user identification/password can also be created. See
		Figure 5-3(SV7000 example) and Figure 5-4(IPX example).
		If the Backup IP/Password Settings option is selected, Installation Manager will
NOTE		back up the SV7000 after configuring the IP address and password.
NOTE		For the IPX, the Backup IP/Password Setting is not available. Instead, there is a
		Total PIMs (Physical +Virtual) field.
		The IPX Installation Manager will automatically perform a System Backup and then
		reset the Voice Server, after the IP address and password are configured.

MA4000 Installation Manager User Guide - Revision 6