Nortel Networks NN43001-106 Attendant and Network-Wide Remote Call Forward, Call Forward, Remote (Attendant and Network-Wide)

Feature interactions 107

Feature interactions

Attendant and Network-Wide Remote Call Forward

When the call forward status of a BFS station is changed from a telephone or

attendant-based Remote Call Forward feature, the BFS lamp(s) associated

with that station are updated accordingly.

Attendant Blocking of Directory Number

The Attendant Blocking of DN feature will override these Call Forward

and Busy Status. If the dialed DN of the telephone is idle, the DN can be

blocked; if the DN is busy, busy tone is heard.

Autodial

Party A can use the Busy/Forward Status key as an Autodial key to dial

Party B.

Call Forward All Calls

Call Forward All Calls must be assigned to Party A’s telephone to enable

the Call Forward Status function, which allows Party B to monitor and alter

the Call Forward state of Party A’s telephone.

Call Forward/Hunt Override Via Flexible Feature Code

Call Forward and Busy Status is overridden by the Call Forward/Hunt

Override Via FFC feature, but there are no changes to the feature itself.

When the call forward status of a BFS station is changed from a telephone or

attendant-based Remote Call Forward feature, the BFS lamp(s) associated

with that station are updated accordingly.

Calling Party Privacy

If an incoming ISDN trunk call with the Privacy Indicator is forwarded, the

Privacy Indicator is tandemed to the far end to inhibit the display of the

Calling Party Name or Number provided that the outgoing trunk route on the

tandem node also has CCP provisioned.

If an incoming non-ISDN trunk call is forwarded to a trunk, the outgoing

trunk call from the tandem node will carry the Privacy Indicator if the

outgoing trunk route on the tandem node has the TCPP option set.

The CCP code can also be stored on the forwarding DN. If the CPP is

requested on the forwarding DN, the Privacy Indicator is outpulsed to the

terminating node to inhibit the number of the forwarding telephone (that is,

at the tandem node) from being displayed on the terminating telephone. In

this case, the forwarding station must include the CPP in the forwarding DN

(such as *67 + ACOD + the DN on the terminating node).

Nortel Communication Server 1000

Features and Services Fundamentals — Book 2 of 6 (C)

NN43001-106 02.04 Standard

Release 5.5 9 May 2008