Feature implementation 459
9. "LD 15 - Configure the ANI route table and CAC conversion table."
(page 466)
Configure the ANI route table and CAC conversion table.
10. "LD 16 - Configure the ANI table entry in the Route Data Block for
incoming R2MFC route." (page 469)
Configure the ANI table entry in the Route Data Block for incoming
R2MFC route.
11. "LD 16 - Configure the ANI table entry and CAC conversion table for
Incoming CIS DTI2 route." (page 469)
Configure the ANI table entry and CAC conversion table for Incoming
CIS DTI2 route.
12. "LD 16 - Configure the ANI table entry for all other route types (ISDN,
incoming CIS analog, incoming" (page 470)
Configure the ANI table entry for all other route types (ISDN, incoming
CIS analog, incoming DTI2 and DPNSS).
13. "LD 88 - Configure the CAC for CIS signaling." (page 471)
Configure the CAC for CIS signaling.
LD 15 - Configure ANI Table for telephones
Prompt Response Description
REQ: NEW
CHG Add new data.
Change existing data
TYPE: ANI Automatic Number Identification
... ... ...
ANLD xx...xx ANI listed directory number (for North American trunk)
CIS_ANI YES (NO) CIS ANI option.
If CIS_ANI=YES, the next sub-prompts is prompted, allowing the
configuration of ANI entries for CIS ANI message composing.
If CIS_ANI=NO, the following sequence of subprompts is
skipped.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.