492 CIS Toll Dial Tone Detection
Prompt Response Description
- TIMR ATO 128-(4992)-
65408 ANI timeout timer in milliseconds. For CIS outgoing trunk routes
this defines the time delay performed after the out-pulsing
of the toll access code. During this delay further out-pulsing
is temporarily halted until the special message from the card
firmware confirms the satisfaction of the CIS Toll out-pulsing
criteria. If the timer expires before satisfaction the behavior of
the system depends on the COAT prompt. If COAT is set to
YES the out-pulsing continues on timeout. If COAT is set to
NO the call is dropped.
... ... ...
CISR YES CIS Route
- DTOC (NO) YES Deny/Allow Direct Toll Connection.
- CTOC (DTDO)
AADT
ANIO
AODT
CIS Toll Outpulsing Criteria.
DTD Only.
ANI And DTD.
ANI Only.
ANI Or DTD.
- COAT (NO) YES NO = Drop Call when ATO timer expires.
YES = Continue Outpulsing when ATO timer expires.
Feature operation
No specific operating procedures are required to use this feature.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.