Feature interactions 567
In-Band Automatic Number Identification
If an agent activates the Conference feature while active on an In-Band
Automatic Number Identification (IANI) call, the display is cleared. The
display remains clear while the Conference call is active. If the conferenced
party releases first, the ANI number appears on the agent’s display.

Malicious Call Trace

When a station or console that is on the conference loop activates the
MCT feature, the trace record shows only the conference loop number and
conference number as the ORIGTN, and the Terminal Number (TN) of the
station or console that activated the feature as the TERTN. No information
on the other parties in the conference is given.

Malicious Call Trace - Enhanced

If MCT is activated during a conference, the trace record shows the
conference number and the conference loop number. Trace records are
printed for each party involved in the conference. The originator of the call’s
trace record is printed first.

Meridian Mail Conference Control

Three- and six-party conference allows 2500 telephones to disconnect from
Meridian Mail by dial access during a conference call.
A 2500 telephone on an established call flashes the switchhook to place
the existing call on Consultation Hold. After receiving special dial tone,
the user dials the third party. If the third party does not answer, the call is
forwarded to Meridian Mail. If the 2500 telephone flashes the switchhook
again, a three-party conference is established, including Meridian Mail. If
the user does not flash the switchhook at this time, Privacy is in effect and
the user can disconnect from Meridian Mail by dial access before returning
to the original call. This can be done if the user is in conference or on a
simple two-party call.
To disconnect from Meridian Mail, press octothorpe (#) to stop the recorded
greeting, octothorpe (#) to stop recording your message, and 83 to
disconnect. To disconnect from any other message system connected to
the system, press 3 to stop the recorded message and the asterisk (*) to
disconnect.
Meridian 911
When a call is answered, and then conferenced, the trunk priority is lost (the
conference consultation call is an internal call and treated as low priority by
the software). This operation is the same for normal calls and 911 calls.

Meridian 911 - Call Abandon

M911 abandoned calls cannot be conferenced.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.