Feature implementation 469
LD 16 - Configure the ANI table entry in the Route Data Block for incoming R2MFC route.
Prompt Response Description
REQ NEW Add new data.
TYPE RDB Route Data Block.
... ... ...
MFC YES Configure Multifrequency Compelled signaling.
- MFCI xMFC Incoming Table.
- MFCO xMFC Outgoing Table.
... ...
ICOG IAO
INC
Incoming and Outgoing.
Incoming.
NCNI 1Request CNI after the defined number of digits are
received. CNI is requested during incoming MFC call after
the first digit of dialed number has been received.
ANIE (0)-x ANI table Entry for Route (configured under prompt
R_ENTRY, OVL 15).
x = R_SIZE-1.
R_Size is the maximum table entry number that can be
configured. (R-SIZE is defined in LD 15).
CAC_CONV (0)-31 CAC conversion table number for CIS Gateway. Configured
against MFC_ENT in LD 15.
Prompted only for non "outgoing only" R2MFC route.
LD 16 - Configure the ANI table entry and CAC conversion table for Incoming CIS DTI2 route.
Prompt Response Description
REQ NEW Add new data.
TYPE RDB Route data block
... ... ...
DGTP DTI2 2 Mbit Digital Trunk Interface.
... ...
ICOG INC Incoming route.
... ... ...
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.