540 CLID on Analog Trunks for Hong Kong (A-CLID)

CLASS: Calling Number and Name Delivery

The analog CLI information is given to the XCMC service pack to provide
number and name display to analog CLASS telephones. The CLASS
telephones can only display the CLI information when the incoming CO call
is auto-terminated on that telephone.
For calls terminating on a CLASS set, only the:
•calling party number and name information display.
•first 15 characters of the information display.

Direct Inward System Access (DISA)

If a user connects to the system through Direct Inward System Access
(DISA) dialing, the incoming trunk information is passed, not the DISA DN
information.

Information Notification Service for Japan

The A-CLID feature does not work with the Information Notification Service
for Japan (INS-J) feature.
Private Line Service
A-CLID information does display on the telephone.
Feature packaging
This feature requires Analog Calling Line Identification (ACLI) package 349.
Feature implementation
Use the Calling Line Identification Allowed (CLIA) Class of Service (CLS) in
LD 14 to activate the A-CLID feature on an individual port basis.
If EXUT is configured on a DXUT-A card pack, and the ACLI package is
equipped, then the default CLS is Calling Line Identification Denied (CLID)
for all incoming CO trunks to that card.
LD 14 - Configure analog CLI.
Prompt Response Description
REQ CHG
NEW x Change existing data block.
Add new data block to the system. Follow NEW with a
value of 1-255 to create that number of consecutive trunks.
TYPE COT Central Office Trunk data block.
.... ....
XTRK EXUT Enhanced Extended CO trunk card.
.... ....
SIGL LOP Loop start
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.