Feature implementation 461
Prompt Response Description
TKTP DID
COT
Direct Inward Dial.
Central Office Trunk.
ICOG OGT Outgoing Route.
... ... ...
CCBA (NO) YES Deny/Allow collect call blocking.
CISR YES (NO) CIS Route
- ANSZ (7)-15 ANI information size. Response is length of LEC+ANI DN.
For analog routes, the only valid response is seven (7).
- ANIC (NO) YES ANI Composing
Prompted for outgoing CIS route.
If ANIC=NO, old ANI composing is used: if the originator of the
call is a set, ANI message will consist of the CAC of the originator
+ the LEC of the outgoing route + the DN of the originator or
the ANDN of the outgoing CIS route, depending on the class of
service (DNAA/DNAD) of the set. If the originator of the call is
an incoming route, the components of the ANI message are
retrieved from default ANI entries and/or from the data block of
the outgoing CIS route ("CIS Gateways Enhancements feature
implementation" (page 466))
If the outgoing CIS route requires new ANI composing to be
used (prompt ANIC=YES), the following is done:
If no entry is associated to the calling set (ANIE=0), then old
ANI composing is used.
If an ANI entry is associated to the calling set (ANIE has a
non-zero value), but the associated ANI entry is not configured,
then old ANI composing is used.
If an ANI entry is associated to the calling set (ANIE has a
non-zero value), and the associated ANI entry is configured,
then ANI table is used for building the ANI message: none of
the components of the ANI message is retrieved from the data
block of the outgoing CIS route.
- LEC 0-99...99 Local Exchange Code of the route. It can be from 0 digit long up
to ANSZ digit long. Prompted for outgoing CIS route. Used for
building ANI message if ANIC is NO or if ANIC=YES but the ANI
entry associated with the originator of the call is not configured.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Copyright © 1994–2008, Nortel Networks
.